DuraLiner™ 8″ Diameter Liner Patch for Rubber EPDM Liner
Quick, Reliable Repair for EPDM Liner Punctures and Cuts
Keep your pond watertight with DuraLiner™ 8" Diameter Liner Patch, the essential solution for quick repair of small cuts, punctures, and tears in EPDM rubber pond liners. These professional-grade patches provide reliable, long-lasting repairs that restore liner integrity and prevent water loss.
Designed specifically for EPDM rubber liners, these 8" diameter patches are large enough to cover most common punctures while providing ample overlap for secure adhesion. The round shape eliminates corners where peeling could start, ensuring the patch stays in place for years.
Universal EPDM Compatibility
DuraLiner™ patches work with all EPDM rubber liners, making them a versatile solution for any pond repair. The 8" diameter provides sufficient coverage for punctures up to 4-5" in diameter while allowing at least 1.5-2" of overlap on all sides for secure bonding.
Key Features
- 8" diameter for coverage of small to medium punctures and cuts
- Compatible with all EPDM rubber pond liners
- Round shape eliminates corners for secure, long-lasting adhesion
- Professional-grade material for reliable repairs
- Quick repair solution for cuts and punctures
- Sold individually for single repairs
- Also available by the case (100 patches) for contractors
- Use with DuraLiner™ Primer for best results
Application Tip: Drain the pond or lower water below the damaged area. Clean and dry thoroughly, apply DuraLiner™ Primer to both liner and patch, allow to flash off, then apply patch from center outward to eliminate air bubbles. Allow 24-48 hours to cure before refilling.
Frequently Asked Questions
What size puncture will this patch cover?
The 8" diameter patch can cover punctures up to 4-5" in diameter while providing at least 1.5-2" of overlap on all sides for secure bonding.
Will this work with my EPDM liner?
Yes, DuraLiner™ patches are compatible with all EPDM rubber pond liners.
Do I need primer to apply the patch?
While not absolutely required, using DuraLiner™ Primer is highly recommended. Primer cleans the surface and dramatically improves adhesion for long-lasting repairs.
Can I apply this patch underwater?
No, the area must be clean and dry for proper adhesion. Drain the pond or lower the water level below the damaged area before applying the patch.
How long does the patch take to cure?
Generally, allow 24-48 hours for full cure before refilling the pond. Curing time varies based on temperature and humidity.
Can I use multiple patches for larger tears?
Yes, you can overlap multiple patches for larger tears. Ensure each patch has adequate overlap with the liner and with adjacent patches.
How do I prevent air bubbles under the patch?
Apply the patch from the center outward, pressing firmly to push air toward the edges. Use a seam roller if available to ensure complete contact.
Are bulk quantities available?
Yes, patches are also available by the case (100 patches per case) for contractors or pond professionals who need multiple patches.